Real World Event Discussions

In the garden, and RAIN!!!!

POSTED BY: SIGNYM
UPDATED: Thursday, December 25, 2025 04:27
VIEWED: 1005090
PAGE 388 of 1154

Saturday, February 22, 2020 9:40 AM

Quote:

Originally posted by SignyM:
BRENDA, I feel your pain! How do you hold two pieces in position and clip or screw then together? With your third (or fourth) hand?

One trick I discovered when I was assembling a shelving unit by my lonesome was to lay it out on the floor for the initial assy, then tip it up before adding shelves and tightening bolts. I have to admit, I was a lot younger then. Not sure I would try the same again.

-----------
Pity would be no more,
If we did not MAKE men poor - William Blake

Happy New Year, WISHY. I edited out your psychopathic screed!



Yup. Last time I did something like this I was younger too. Think in my 20s.

Realized that I should have put it together standing up. I got both pieces together but they are separated spots. Going to see if I can fix my mess-up tomorrow.

NOTIFY: Y  | REPLY  | REPLY WITH QUOTE  | PERMALINK  | TOP  | HOME

Saturday, February 22, 2020 9:55 AM

"we called a local company that we've worked with before and they did the job for $200" I'm curious - did they check the other ones as well?

"Oh indeed, if people only knew what was behind the walls their skin would crawl!" I know what's behind mine! Mice and rats, thanks to balloon framing. And let's not forgot the (probably raccoon) that ripped off some of the siding and is now living in the attic. Not for long. The exterminator is coming out Monday.

"While installing a light fixture hubby discovered that - with the switch off- of he touched the hot and neutral lines with one hand and the ground with the back of his hand he got a significant shock. The wiring in this place is atrocious, we fix it as we encounter it but hubby keeps asking if the place was built by monkeys." I might have mentioned how I got juiced in the shower, since the hot and neutral were reversed in a lighting fixture, which somehow shifted onto the vent stack, putting voltage on the drain system.

Entropy - and critters!!! They're all such rascals.

NOTIFY: N  | REPLY  | REPLY WITH QUOTE  | PERMALINK  | TOP  | HOME

Saturday, February 22, 2020 9:59 AM

Quote:

Originally posted by SignyM:
BRENDA, I feel your pain! How do you hold two pieces in position and clip or screw then together? With your third (or fourth) hand?

One trick I discovered when I was assembling a shelving unit by my lonesome was to lay it out on the floor for the initial assy, then tip it up before adding shelves and tightening bolts. I have to admit, I was a lot younger then. Not sure I would try the same again.

-----------
Pity would be no more,
If we did not MAKE men poor - William Blake

Happy New Year, WISHY. I edited out your psychopathic screed!

Quote:

Originally posted by Brenda:

Yup. Last time I did something like this I was younger too. Think in my 20s.

Realized that I should have put it together standing up. I got both pieces together but they are separated spots. Going to see if I can fix my mess-up tomorrow.

Me three. It was a long time ago for me as well. I got nothing. No suggestions. I just kept struggling till I managed and I don't even remember what I did. And I think I'd be hard-pressed to manage it again.

NOTIFY: N  | REPLY  | REPLY WITH QUOTE  | PERMALINK  | TOP  | HOME

Saturday, February 22, 2020 11:48 AM

Quote:

Originally posted by 1KIKI:
"we called a local company that we've worked with before and they did the job for $200" I'm curious - did they check the other ones as well?

"Oh indeed, if people only knew what was behind the walls their skin would crawl!" I know what's behind mine! Mice and rats, thanks to balloon framing. And let's not forgot the (probably raccoon) that ripped off some of the siding and is now living in the attic. Not for long. The exterminator is coming out Monday.

"While installing a light fixture hubby discovered that - with the switch off- of he touched the hot and neutral lines with one hand and the ground with the back of his hand he got a significant shock. The wiring in this place is atrocious, we fix it as we encounter it but hubby keeps asking if the place was built by monkeys." I might have mentioned how I got juiced in the shower, since the hot and neutral were reversed in a lighting fixture, which somehow shifted onto the vent stack, putting voltage on the drain system.

Entropy - and critters!!! They're all such rascals.






I've still got a weird "cave-in" situation happening on the drywall that was installed needlessly in the attic (for finished "rooms" that can't be added to the square footage of the house since there is no point of egress up there besides the tiny window I put the blower in, and there is no heat/or air conditioning up there).

It's bowed in a bit between the rafters. From the outside, everything looks fine. There is no water damage.

I'm eventually going to have to knock some of this down and see just what the hell is happening. I'd be more concerned right now if there was water.

Do Right, Be Right. :)

NOTIFY: Y  | REPLY  | REPLY WITH QUOTE  | PERMALINK  | TOP  | HOME

Saturday, February 22, 2020 11:58 AM

I always wondered how the previous owners just turned a blind eye. Didn't they notice? Didn't they care?

Yours sounds like the same thing ...

NOTIFY: N  | REPLY  | REPLY WITH QUOTE  | PERMALINK  | TOP  | HOME

Saturday, February 22, 2020 12:53 PM

Hey Signy

You asked a couple of questions about emergency supplies in the coronavirus thread

http://www.fireflyfans.net/mthread.aspx?bid=18&tid=63473&mid=1
094445#1094445

Sunday, February 16, 2020 3:26 PM

http://www.fireflyfans.net/mthread.aspx?bid=18&tid=63473&mid=1
094492#1094492

Monday, February 17, 2020 10:16 AM

that I accidentally answered here
http://www.fireflyfans.net/mthread.aspx?bid=18&tid=58882&mid=1
094532#1094532

Monday, February 17, 2020 6:14 PM

NOTIFY: N  | REPLY  | REPLY WITH QUOTE  | PERMALINK  | TOP  | HOME

Saturday, February 22, 2020 1:34 PM

Quote:

Originally posted by 1KIKI:
Quote:

Originally posted by SignyM:
BRENDA, I feel your pain! How do you hold two pieces in position and clip or screw then together? With your third (or fourth) hand?

One trick I discovered when I was assembling a shelving unit by my lonesome was to lay it out on the floor for the initial assy, then tip it up before adding shelves and tightening bolts. I have to admit, I was a lot younger then. Not sure I would try the same again.

-----------
Pity would be no more,
If we did not MAKE men poor - William Blake

Happy New Year, WISHY. I edited out your psychopathic screed!

Quote:

Originally posted by Brenda:

Yup. Last time I did something like this I was younger too. Think in my 20s.

Realized that I should have put it together standing up. I got both pieces together but they are separated spots. Going to see if I can fix my mess-up tomorrow.

Me three. It was a long time ago for me as well. I got nothing. No suggestions. I just kept struggling till I managed and I don't even remember what I did. And I think I'd be hard-pressed to manage it again.



The thing with this bookcase Kiki is the top half is heavier than the bottom. So I can't lift it into place. I am going to see if I can take apart the top half and then redo it and hopefully get it to fit on the bottom half. It's about all I can do.

NOTIFY: Y  | REPLY  | REPLY WITH QUOTE  | PERMALINK  | TOP  | HOME

Saturday, February 22, 2020 10:45 PM

That seems awkward to me and not terribly stable. If I got it right, you're going to reconfigure it so the heavier part is on the bottom? That sounds promising! I hope it all goes easily, Brenda!

NOTIFY: N  | REPLY  | REPLY WITH QUOTE  | PERMALINK  | TOP  | HOME

Saturday, February 22, 2020 10:57 PM

Quote:

SIGNY: BRENDA, I feel your pain! How do you hold two pieces in position and clip or screw then together? With your third (or fourth) hand? One trick I discovered when I was assembling a shelving unit by my lonesome was to lay it out on the floor for the initial assy, then tip it up before adding shelves and tightening bolts. I have to admit, I was a lot younger then. Not sure I would try the same again.

Originally posted by Brenda:

BRENDA: Yup. Last time I did something like this I was younger too. Think in my 20s.
Realized that I should have put it together standing up. I got both pieces together but they are separated spots. Going to see if I can fix my mess-up tomorrow.

KIKI: Me three. It was a long time ago for me as well. I got nothing. No suggestions. I just kept struggling till I managed and I don't even remember what I did. And I think I'd be hard-pressed to manage it again.

BRENDA: The thing with this bookcase Kiki is the top half is heavier than the bottom. So I can't lift it into place. I am going to see if I can take apart the top half and then redo it and hopefully get it to fit on the bottom half. It's about all I can do.

Gee, that sounds like a crappy design. As KIKI said, not terribly stable and also pretty hard to put together! Also, one of those design flaws that's hard to spot in the store. I also hope you can reconfigure it succssfully.

-----------
Pity would be no more,
If we did not MAKE men poor - William Blake

Happy New Year, WISHY. I edited out your psychopathic screed!

NOTIFY: Y  | REPLY  | REPLY WITH QUOTE  | PERMALINK  | TOP  | HOME

Saturday, February 22, 2020 11:10 PM

Quote:

Originally posted by 1KIKI:
That seems awkward to me and not terribly stable. If I got it right, you're going to reconfigure it so the heavier part is on the bottom? That sounds promising! I hope it all goes easily, Brenda!



No I'm not. I'm going to see if I can take the top half apart and then fit it to the bottom. The top has something that has to be screwed into the wall to hold it upright because it is so heavy and two possibly to keep it from falling incase of an earthquake. Will let you know what I did later today.

NOTIFY: Y  | REPLY  | REPLY WITH QUOTE  | PERMALINK  | TOP  | HOME