Serenity Blueprints

POSTED BY: DamoclesX
UPDATED: Wednesday, January 11, 2006 21:05
VIEWED: 14284
PAGE 2 of 3

PREV PAGE 1 2 3 NEXT PAGE

ANND

Monday, May 19, 2003 9:13 PM

Check out the thread "blueprint conundrum" there's quite a bit of talk about layouts etc.

Ann

CAPTBAGGYTROUSERS

Monday, May 19, 2003 9:43 PM

The "Blueprint Conundrum..." seemed to deal primarily with the interior of Serenity and this one with the exterior.

MONICA

Tuesday, January 10, 2006 9:33 AM

What I have been doing is to go through the entire series and the movie, doing stills on my computer of the various angles of the ship. In the Special Features on Disc Four of the series, It has a piece called "Serenity, the 10th Character." They do a full screem side-view, blueprint line drawing, which adds to the info I'm gathering.

The ship is 190 feet in length, so one can figure the other diomentions from there. Takes a bit of geometry and trig to work it out, but one could get all the dimentions to build a rather accurate model, if one has that skill.

One could build it using styrene and acrylic plastic parts sold it a good hobby store. Lights can be installed in the appropiate and it would be very easy to have a rotating disc that's seen in the front of the engine section. It's very easy, but will be time consuming and could be expensive, depending on what features you want to add, such as retracting landing pads, a cargo door that opens and shuts, and rear engine panels that will open. Gears, motors and everything you'de need is in a hobby store and Radio Shack. It will be a rather fun project.

Monica
(Inora's great, great, great, great grandmother)

CITIZEN

Tuesday, January 10, 2006 1:37 PM

DARKLIGHTER9

Tuesday, January 10, 2006 2:15 PM

I found this, hope it helps (should do, looks bitching) has high def cgi pics of bottom, top, side, front and back veiws of the shpi we all know and love, plus cut away interior maps of side and plan view, both decks. Sadly no dimentions but this is probably the next best thing to blueprints

http://www.fireflywiki.org/Firefly/FireflyTransport

Hope it helps!

________________________________________________
"its clear that the only way around this is to stick my fingers in my ears, close my eyes and sing the firefly theme very loudly" a friend of mine talking about a cirtain scene in the BDM

MYCROFTXXX

Tuesday, January 10, 2006 6:15 PM

I seem to recall there is a discussion thread somewhere that covered the development of a Lightwave generated model of the ship. It even had intermediate pix of its development. I'm a relatively new user in this discussion board and haven't mastered the search feature to find it (I have it bookmarked but on a different machine).

I, too, am interested in getting my hands on a model of this specifically for developing a physical model of the ship. I use Bentley's MicroStation product to read the model geometry. There are Lightwave to 3DS converters so my plan is to "beg" for the model and, using a cool built-in MicroStation feature, generate several accurate cross sections of the model and essentially build ribs like an RC airplane wing or fuselage (I've built my share of these). Skinning the skeleton could be tricky but not impossible. The best thing is I can build it to any scale I want using this technique (hmmm, how's 1 meter sound?)

As an alternative to this method but one that limits its size is to create the proper geometry needed to go out for development into a rapid prototype model (aka stereo lithography)then using a tried and true modeling technique generate a hollow resin model of the results. A little airbrushing including simulation of the wear and tear on the ship and I'll have a nice model to hang in my Sci-Fi themed media room.

Of course, the biggest problem is carving out enough time in my schedule to do all this...

CLJOHNSTON108

Wednesday, January 11, 2006 12:16 AM

Y'know, there's a truly amazing FREE spaceflight simulator called ORBITER...
http://www.orbitersim.com
...which has more realistic physics (and is more expansive) than anything I've seen available commercially!

A talented individual named Jon Marcure has been creating vessels from popular science fiction.

"Serenity" update continued BIG pictures
http://orbit.m6.net/v2/read.asp?id=27546

He accidentally deleted the directory with his WIP shots, so his images don't start until page 8.

Fortunately, I saved a couple of the early ones...

His earlier version, an "Ought 2" called the "Freefall", is in the background.

He's even created a smaller variant, called the "Sport Model"...

SERAPHANT

Wednesday, January 11, 2006 6:53 AM

just sent you an email with a good top and side view

NEVERED

Wednesday, January 11, 2006 6:59 AM

does anyone know what that little room under the bridge is for?

you can see the door leading to it in any episode (out of gas sticks out in my mind, the scene where wash is introduced, when mal and zoe talk in the hall you can see the door clear as day because of the lighting)

as far as i can tell, they never use that room.

originally, i just thought it led to the lower part of the bridge, where the commentaries say the lounge used to be, but the side-view blueprints make it look as if it's its own room. with windows?

CITIZEN

Wednesday, January 11, 2006 8:56 AM

My 3D Studio Max (untextured) model can be found here.
http://www.twisted-imaginings.com/Share/Serenity%20v3%20GR21.zip

You can use it however you wish, just give me credit and I wouldn't mind seeing what you do with it.

More insane ramblings by the people who brought you beeeer milkshakes!
The statistics on sanity are that one out of every four persons is suffering from some sort of mental illness. Think of your three best friends -- if they're okay, then it's you.

PREV PAGE 1 2 3 NEXT PAGE